Welcome, visitor! [ Register | Loginrss   fb   fb   fb   fb  

This item is BRAND NEW NEVER USED! 						I have a small inventory so buy them while they last! 						 						100% satisfaction guaranteed, locally sold so you can have your foam lance in hand TODAY 						Ive sold 17 so far and everyone who has bought them have been absolutely happy with them 						 						The Hydrolance is a cost effective, quality made snow foam lance. Capable of cleaning Fences, House exteriors, RV's and Motorhomes, Campers, Boats, Jet skis, Planes, Off-Road Toys, Trailers, High-End Automobiles and more.  						 						The Hydrolance provides superior protecting for your investment by effectively removing the majority of the contaminants that cause scratches and swirls. You can use the Hydrolance to pre-wash your car, let it sit for 5 or more minutes and then quickly rinse it off with your power washer. You can do this pre-wash as many times as you like, then follow it up by another application of foam and scrubbing with a wash mitt or wash rag for a high quality deep cleaning of your cars paint. 						 						Because the foam sticks to the car extremely well, the soap has more time to stay in contact with the paint providing the most effective pre-wash possible and the highest level of protection from contaminates possible during a car wash. 						 						 						Sturdy Construction: 						 						-Injector head is constructed from solid brass 						-34 ounce (1L) bottle is made from chemically resistant high density polyethylene (HDPE) 						-Adjustable foaming tip is made of heavy duty plastic 						-Resistant to corrosion water and chemicals 						 						Full Adjustability:  						 						-The foaming tip offers adjustable spray patterns that can dispense thick or light foam with a quick turn as well as providing a wide coverage and long distance spray  						-Adjustable ratio injector head offers highly flexible dilution rate adjustability via a large top mounted control dial, which allows you to fine tune the exact level of foam produced 						 						Specifications:  						 						-Inlet 1/4" - Includes 1/4" quick disconnect - as well as m22 threaded fittings (easy attachment to many washers) 						-Rated Pressure - 5000 PSI - up to 20 Feet spray! 						-Rated Flow Rate 5.3 GPM (20 L/min)  						-Rated Temperature 60*C - 140*F  						-Easily attaches to many pressure washers with the 1/4" Male Quick Connected 						-Excellent for small electric/gas pressure washers 						-Product Dimensions: 11" x 7" x 3.5" 						 						Requirements: 						 						Minimum of 1500 PSI and 2 GPM Maximum of 5000 PSI and 5.3 GPM Will need adaptor to fit consumer grade electric units w/ bayonet connectors 						 						 						This is just like the chemical guys foam lance which sells for $80! 						Why pay such a ridiculous price plus shipping 						 						You can also use other chemicals in the foam lance like bleach (mixed with some soap) to clean off house siding, pool chlorine to clean off roof tiles and even concrete cleaner. Here is three reviews off of amazon about how people use their foam lance: 						 						"Bought this to use on my house. After pressure washing my house "the old fashioned way" using just pressure, I learned that the real way to do it is use a soap and bleach mix and spray it on and let it sit. Then hose it off. The key is to get the soap to stick to the siding while the "bleach" (sodium hypochlorite aka "SH" is major active ingredient in bleach) works on the mold, and the soap scrubs the dirt off the siding as it drips down. Ultra Gain dish soap is used because it doesn't contain any chemical that interacts with bleach, such as Dawn, which creates some form of chemical gas." 						 						"Love this thing! Makes a wall of foam. I use it for my f150 and also when I pressure wash my driveway. Lays down concrete cleaner in a rug of foam." 						 						"You can use anything in it. I've used concrete cleaner to foam down the driveway before pressure washing. I've used pool chlorine to spray the roof tiles. And I've used a salt vinegar mixture to spray areas of weeds to kill. This thing is a champ." 						 						A foam lance would be a great addition to any hand car wash and detailing service business and can be used with existing soap supplies
 

$50

5000 psi Professional High Pressure Snow Foam Lance Soap Gun Washer –...

This item is BRAND NEW NEVER USED! I have a small inventory so buy them while they last! 100% satisfaction guaranteed, locally sold so you ...

Contains the following tools in a very nice compact case: 						 						Driver Handle with the following: 						5mm regular screwdriver 						No.1 and No.2 Phillips screwdriver 						Thumbtack puller 						Gimlet 						Hammer head 						Mini screwdrivers:  						1.8mm regular 						No.00 Phillips 						1M tape measure 						80mm cutting knife 						120mm multi-purpose pliers 						 						Like new condition. 						 						$10.
 

$10

Tool Kit, Compaq Branded – $10 (Houston)

Contains the following tools in a very nice compact case: Driver Handle with the following: 5mm regular screwdriver No.1 and No.2 Phi...

 

$49,000

1998 Okuma & Howa Twin Spindle cnc lathe – $49,000 (Houston)

We are selling a 1998 Okuma & Howa Twin Spindle cnc lathe Turning Center model 2SP20HG. This is a twin spindle 8" chuck machine with a robotic gantry...

commercial & industrial fan for ventilation and air movement. 42" belt drive deep pitch 4 wing blade for quiet operation, 48x48" overall, 3/4 HP motor, 16500 CFM. $894 Includes matching gravity shutter louver.  Jacob's Fan Co. Model IEF42-3/4   www.jacobsfan.com Austin (512)207-0902 Houston (713)227-6491
 

$894

42″ wall exhaust fan & shutter – $894 (Houston)

commercial & industrial fan for ventilation and air movement. 42" belt drive deep pitch 4 wing blade for quiet operation, 48x48" overall, 3/4 HP...

 

$1,999

1880′s George Washington Historic Masonic Bas Relief – $1,999 (...

Masonic Bas Relief (Plaster) of George Washington with his quote, “Nothing but harmony, honesty, industry, and frugality are necessary to make us a great and ...

 

$250

Ridgid Pipe Wrenches – 48″ & 36″ – $250 (Pales...

Two Ridgid brand steel pipe wrenches. One is a 48" and the other is 36".

 

$250

Ridgid Pipe Wrenches – 48″ & 36″ – $250 (Pales...

Two Ridgid brand steel pipe wrenches. One is a 48" and the other is 36".

THIS PARKERHOUSE LIBRARY WAS CONSIGNED TO US BY A STORE THAT HAS GONE OUT OF BUSINESS. WE HAVE TAKEN A LOT OF THESE PIECES ,AND STILL HAVE ENOUGH THAT WE CAN FILL ALMOST ANY WALL. THE SET THAT IS PICTURED FOR $3.999 IS NORMALLY $10.000 						CALL TOLL FREE 866 270 1777 						 						HIGH END CONSIGNMENT  WON'T TAKE FURNITURE IN ON CONSIGNMENT UNLESS IT IS IN VERY GOOD CONDITION AND HIGH QUALITY. OUR STANDARDS ARE HIGH, OUR PRICES ARE LOW. 						 						THESE, LIBRARY PIECES ARE NEW IN THE BOX. WE DO UNPACK THEM BEFORE SHIPPING, AND RE PACK THEM FOR SHIPPING. FREE SHIPPING 						PLEASE CLICK ON LINK BELOW 						 						http://www.ebay.com/itm/PARKERHOUSE-LIBRARY-WALL-UNIT-NICE-GETS-FREE-DEL-48-STATE-3999-00-/271044480166?pt=US_Desks_and_Home_Office_Furniture&hash=item3f1b828ca6 						 						ANYWHERE IN THE US EXCEPT HAWAII ALASKA AND CANADA. THEY CAN BE SHIPPED THEIR TO FOR A FEW DOLLARS MORE. 						 						Contact Jack for details: 						(714) 231-0394 						(866) 270-1777 						 						Visit us @ www.oakwoodinteriors.org 						 						measurements for this set is 110'' molding to molding 98'' tall  cabinets are 17''s deep.
 

$3,999

Parkerhouse Library Wall Unit – $3,999 (Houston)

THIS PARKERHOUSE LIBRARY WAS CONSIGNED TO US BY A STORE THAT HAS GONE OUT OF BUSINESS. WE HAVE TAKEN A LOT OF THESE PIECES ,AND STILL HAVE ENOUGH THAT WE CAN ...

Our printer died and we had a tri-color cartridge left over. 						 						New, unopened package. 						 						Package date: APR10 						 						$5.
 

$5

HP 28 Tri-Color Cartridge – $5 (Houston)

Our printer died and we had a tri-color cartridge left over. New, unopened package. Package date: APR10 $5.

2001 Haas SL30T CNC Turning Center 						 						SPECIFICATIONS: 						CONTROL: HAAS  						CHUCK SIZE: 10"  						MAX BAR CAPACITY: 3"  						MAX. CUTTING DIAMETER: 17"  						MAX. SWING: 30"  						DISTANCE BETWEEN CENTERS: 39"  						SPINDLE SPEEDS: 3,400 RPM  						SPINDLE MOTOR: 30 HP  						SPINDLE NOSE: A2-8  						TURRET STATIONS: 12 						 						EQUIPPED WITH: 						10" MMK 3 JAW CHUCK  						CHIP AUGER  						PROGRAMMABLE TAILSTOCK  						QUICK CODE PROGRAMMING  						3.5" FLOPPY DISK DRIVE  						TOOL PRESETTER  						1 MB  						2 SPEED GEAR BOX 						 						PRICE: $37,500.00 IN TEXAS PLANT MAKING PARTS!
 

$37,500

2001 Haas SL30T CNC Turning Center * In Plant Making Parts! – $37,500...

2001 Haas SL30T CNC Turning Center SPECIFICATIONS: CONTROL: HAAS CHUCK SIZE: 10" MAX BAR CAPACITY: 3" MAX. C...

Search By